nixbot

error:
       … while calling the 'derivationStrict' builtin
         at «nix-internal»/derivation-internal.nix:37:12:
           36|
           37|   strict = derivationStrict drvAttrs;
             |            ^
           38|

       … while evaluating derivation 'home-manager-generation'
         whose name attribute is located at «https://releases.nixos.org/nixos/unstable-small/nixos-26.11pre1079814.31b6ba6aadb1/nixexprs.tar.xz?narHash=sha256-BdR35dyXnujRlOuHEvPdtNV6JFEIOQkKyT93EjGFWU4%3D»/pkgs/stdenv/generic/make-derivation.nix:651:11

       … while evaluating attribute 'buildCommand' of derivation 'home-manager-generation'
         at «https://releases.nixos.org/nixos/unstable-small/nixos-26.11pre1079814.31b6ba6aadb1/nixexprs.tar.xz?narHash=sha256-BdR35dyXnujRlOuHEvPdtNV6JFEIOQkKyT93EjGFWU4%3D»/pkgs/build-support/trivial-builders/default.nix:88:9:
           87|         inherit name;
           88|         buildCommand = lib.toFunction buildCommand finalAttrs;
             |         ^
           89|         passAsFile = defaultPassAsFile ++ (userAttrs.passAsFile or [ ]);

       … while evaluating the option `home.activation.installPackages.data':

       … while evaluating definitions from `/nix/store/xnygwnm7n6j5rnnwb4dcp0i2hlwq5amj-source/modules/home-environment.nix':

       (stack trace truncated; use '--show-trace' to show the full, detailed trace)

       error: Refusing to evaluate package 'radicle-node-1.10.3' in /nix/store/0ifrm3l8fci5rh6b4yd22ld77q9mza97-source/pkgs/by-name/ra/radicle-node/package.nix:165 because it is marked as insecure

       Known issues:
        - Private repositories are insecure: traffic between nodes is not encrypted and not authenticated.

       You can install it anyway by allowing this package, using the
       following methods:

       a) To temporarily allow all insecure packages, you can use an environment
          variable for a single invocation of the nix tools:

            $ export NIXPKGS_ALLOW_INSECURE=1

          Note: When using `nix shell`, `nix build`, `nix develop`, etc with a flake,
                then pass `--impure` in order to allow use of environment variables.

       b) for `nixos-rebuild` you can add ‘radicle-node-1.10.3’ to
          `nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
          like so:

            {
              nixpkgs.config.permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

       c) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
          ‘radicle-node-1.10.3’ to `permittedInsecurePackages` in
          ~/.config/nixpkgs/config.nix, like so:

            {
              permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

error:
       … while calling the 'derivationStrict' builtin
         at «nix-internal»/derivation-internal.nix:37:12:
           36|
           37|   strict = derivationStrict drvAttrs;
             |            ^
           38|

       … while evaluating derivation 'home-manager-generation'
         whose name attribute is located at «https://releases.nixos.org/nixos/unstable-small/nixos-26.11pre1079814.31b6ba6aadb1/nixexprs.tar.xz?narHash=sha256-BdR35dyXnujRlOuHEvPdtNV6JFEIOQkKyT93EjGFWU4%3D»/pkgs/stdenv/generic/make-derivation.nix:651:11

       … while evaluating attribute 'buildCommand' of derivation 'home-manager-generation'
         at «https://releases.nixos.org/nixos/unstable-small/nixos-26.11pre1079814.31b6ba6aadb1/nixexprs.tar.xz?narHash=sha256-BdR35dyXnujRlOuHEvPdtNV6JFEIOQkKyT93EjGFWU4%3D»/pkgs/build-support/trivial-builders/default.nix:88:9:
           87|         inherit name;
           88|         buildCommand = lib.toFunction buildCommand finalAttrs;
             |         ^
           89|         passAsFile = defaultPassAsFile ++ (userAttrs.passAsFile or [ ]);

       … while evaluating the option `home.activation.installPackages.data':

       … while evaluating definitions from `/nix/store/xnygwnm7n6j5rnnwb4dcp0i2hlwq5amj-source/modules/home-environment.nix':

       (stack trace truncated; use '--show-trace' to show the full, detailed trace)

       error: Refusing to evaluate package 'radicle-node-1.10.3' in /nix/store/0ifrm3l8fci5rh6b4yd22ld77q9mza97-source/pkgs/by-name/ra/radicle-node/package.nix:165 because it is marked as insecure

       Known issues:
        - Private repositories are insecure: traffic between nodes is not encrypted and not authenticated.

       You can install it anyway by allowing this package, using the
       following methods:

       a) To temporarily allow all insecure packages, you can use an environment
          variable for a single invocation of the nix tools:

            $ export NIXPKGS_ALLOW_INSECURE=1

          Note: When using `nix shell`, `nix build`, `nix develop`, etc with a flake,
                then pass `--impure` in order to allow use of environment variables.

       b) for `nixos-rebuild` you can add ‘radicle-node-1.10.3’ to
          `nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
          like so:

            {
              nixpkgs.config.permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

       c) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
          ‘radicle-node-1.10.3’ to `permittedInsecurePackages` in
          ~/.config/nixpkgs/config.nix, like so:

            {
              permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

error:
       … while calling the 'derivationStrict' builtin
         at «nix-internal»/derivation-internal.nix:37:12:
           36|
           37|   strict = derivationStrict drvAttrs;
             |            ^
           38|

       … while evaluating derivation 'home-manager-generation'
         whose name attribute is located at «https://releases.nixos.org/nixos/unstable-small/nixos-26.11pre1079814.31b6ba6aadb1/nixexprs.tar.xz?narHash=sha256-BdR35dyXnujRlOuHEvPdtNV6JFEIOQkKyT93EjGFWU4%3D»/pkgs/stdenv/generic/make-derivation.nix:651:11

       … while evaluating attribute 'buildCommand' of derivation 'home-manager-generation'
         at «https://releases.nixos.org/nixos/unstable-small/nixos-26.11pre1079814.31b6ba6aadb1/nixexprs.tar.xz?narHash=sha256-BdR35dyXnujRlOuHEvPdtNV6JFEIOQkKyT93EjGFWU4%3D»/pkgs/build-support/trivial-builders/default.nix:88:9:
           87|         inherit name;
           88|         buildCommand = lib.toFunction buildCommand finalAttrs;
             |         ^
           89|         passAsFile = defaultPassAsFile ++ (userAttrs.passAsFile or [ ]);

       … while evaluating the option `home.activation.installPackages.data':

       … while evaluating definitions from `/nix/store/xnygwnm7n6j5rnnwb4dcp0i2hlwq5amj-source/modules/home-environment.nix':

       (stack trace truncated; use '--show-trace' to show the full, detailed trace)

       error: Refusing to evaluate package 'radicle-node-1.10.3' in /nix/store/0ifrm3l8fci5rh6b4yd22ld77q9mza97-source/pkgs/by-name/ra/radicle-node/package.nix:165 because it is marked as insecure

       Known issues:
        - Private repositories are insecure: traffic between nodes is not encrypted and not authenticated.

       You can install it anyway by allowing this package, using the
       following methods:

       a) To temporarily allow all insecure packages, you can use an environment
          variable for a single invocation of the nix tools:

            $ export NIXPKGS_ALLOW_INSECURE=1

          Note: When using `nix shell`, `nix build`, `nix develop`, etc with a flake,
                then pass `--impure` in order to allow use of environment variables.

       b) for `nixos-rebuild` you can add ‘radicle-node-1.10.3’ to
          `nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
          like so:

            {
              nixpkgs.config.permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

       c) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
          ‘radicle-node-1.10.3’ to `permittedInsecurePackages` in
          ~/.config/nixpkgs/config.nix, like so:

            {
              permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

error:
       … while calling the 'derivationStrict' builtin
         at «nix-internal»/derivation-internal.nix:37:12:
           36|
           37|   strict = derivationStrict drvAttrs;
             |            ^
           38|

       … while evaluating derivation 'home-manager-generation'
         whose name attribute is located at «https://releases.nixos.org/nixos/unstable-small/nixos-26.11pre1079814.31b6ba6aadb1/nixexprs.tar.xz?narHash=sha256-BdR35dyXnujRlOuHEvPdtNV6JFEIOQkKyT93EjGFWU4%3D»/pkgs/stdenv/generic/make-derivation.nix:651:11

       … while evaluating attribute 'buildCommand' of derivation 'home-manager-generation'
         at «https://releases.nixos.org/nixos/unstable-small/nixos-26.11pre1079814.31b6ba6aadb1/nixexprs.tar.xz?narHash=sha256-BdR35dyXnujRlOuHEvPdtNV6JFEIOQkKyT93EjGFWU4%3D»/pkgs/build-support/trivial-builders/default.nix:88:9:
           87|         inherit name;
           88|         buildCommand = lib.toFunction buildCommand finalAttrs;
             |         ^
           89|         passAsFile = defaultPassAsFile ++ (userAttrs.passAsFile or [ ]);

       … while evaluating the option `home.activation.installPackages.data':

       … while evaluating definitions from `/nix/store/xnygwnm7n6j5rnnwb4dcp0i2hlwq5amj-source/modules/home-environment.nix':

       (stack trace truncated; use '--show-trace' to show the full, detailed trace)

       error: Refusing to evaluate package 'radicle-node-1.10.3' in /nix/store/0ifrm3l8fci5rh6b4yd22ld77q9mza97-source/pkgs/by-name/ra/radicle-node/package.nix:165 because it is marked as insecure

       Known issues:
        - Private repositories are insecure: traffic between nodes is not encrypted and not authenticated.

       You can install it anyway by allowing this package, using the
       following methods:

       a) To temporarily allow all insecure packages, you can use an environment
          variable for a single invocation of the nix tools:

            $ export NIXPKGS_ALLOW_INSECURE=1

          Note: When using `nix shell`, `nix build`, `nix develop`, etc with a flake,
                then pass `--impure` in order to allow use of environment variables.

       b) for `nixos-rebuild` you can add ‘radicle-node-1.10.3’ to
          `nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
          like so:

            {
              nixpkgs.config.permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

       c) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
          ‘radicle-node-1.10.3’ to `permittedInsecurePackages` in
          ~/.config/nixpkgs/config.nix, like so:

            {
              permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

error:
       … while calling the 'derivationStrict' builtin
         at «nix-internal»/derivation-internal.nix:37:12:
           36|
           37|   strict = derivationStrict drvAttrs;
             |            ^
           38|

       … while evaluating derivation 'home-manager-generation'
         whose name attribute is located at «https://releases.nixos.org/nixos/unstable-small/nixos-26.11pre1079814.31b6ba6aadb1/nixexprs.tar.xz?narHash=sha256-BdR35dyXnujRlOuHEvPdtNV6JFEIOQkKyT93EjGFWU4%3D»/pkgs/stdenv/generic/make-derivation.nix:651:11

       … while evaluating attribute 'buildCommand' of derivation 'home-manager-generation'
         at «https://releases.nixos.org/nixos/unstable-small/nixos-26.11pre1079814.31b6ba6aadb1/nixexprs.tar.xz?narHash=sha256-BdR35dyXnujRlOuHEvPdtNV6JFEIOQkKyT93EjGFWU4%3D»/pkgs/build-support/trivial-builders/default.nix:88:9:
           87|         inherit name;
           88|         buildCommand = lib.toFunction buildCommand finalAttrs;
             |         ^
           89|         passAsFile = defaultPassAsFile ++ (userAttrs.passAsFile or [ ]);

       … while evaluating the option `home.activation.installPackages.data':

       … while evaluating definitions from `/nix/store/xnygwnm7n6j5rnnwb4dcp0i2hlwq5amj-source/modules/home-environment.nix':

       (stack trace truncated; use '--show-trace' to show the full, detailed trace)

       error: Refusing to evaluate package 'radicle-node-1.10.3' in /nix/store/0ifrm3l8fci5rh6b4yd22ld77q9mza97-source/pkgs/by-name/ra/radicle-node/package.nix:165 because it is marked as insecure

       Known issues:
        - Private repositories are insecure: traffic between nodes is not encrypted and not authenticated.

       You can install it anyway by allowing this package, using the
       following methods:

       a) To temporarily allow all insecure packages, you can use an environment
          variable for a single invocation of the nix tools:

            $ export NIXPKGS_ALLOW_INSECURE=1

          Note: When using `nix shell`, `nix build`, `nix develop`, etc with a flake,
                then pass `--impure` in order to allow use of environment variables.

       b) for `nixos-rebuild` you can add ‘radicle-node-1.10.3’ to
          `nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
          like so:

            {
              nixpkgs.config.permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

       c) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
          ‘radicle-node-1.10.3’ to `permittedInsecurePackages` in
          ~/.config/nixpkgs/config.nix, like so:

            {
              permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

error:
       … while calling the 'derivationStrict' builtin
         at «nix-internal»/derivation-internal.nix:37:12:
           36|
           37|   strict = derivationStrict drvAttrs;
             |            ^
           38|

       … while evaluating derivation 'home-manager-generation'
         whose name attribute is located at «https://releases.nixos.org/nixos/unstable-small/nixos-26.11pre1079814.31b6ba6aadb1/nixexprs.tar.xz?narHash=sha256-BdR35dyXnujRlOuHEvPdtNV6JFEIOQkKyT93EjGFWU4%3D»/pkgs/stdenv/generic/make-derivation.nix:651:11

       … while evaluating attribute 'buildCommand' of derivation 'home-manager-generation'
         at «https://releases.nixos.org/nixos/unstable-small/nixos-26.11pre1079814.31b6ba6aadb1/nixexprs.tar.xz?narHash=sha256-BdR35dyXnujRlOuHEvPdtNV6JFEIOQkKyT93EjGFWU4%3D»/pkgs/build-support/trivial-builders/default.nix:88:9:
           87|         inherit name;
           88|         buildCommand = lib.toFunction buildCommand finalAttrs;
             |         ^
           89|         passAsFile = defaultPassAsFile ++ (userAttrs.passAsFile or [ ]);

       … while evaluating the option `home.activation.installPackages.data':

       … while evaluating definitions from `/nix/store/xnygwnm7n6j5rnnwb4dcp0i2hlwq5amj-source/modules/home-environment.nix':

       (stack trace truncated; use '--show-trace' to show the full, detailed trace)

       error: Refusing to evaluate package 'radicle-node-1.10.3' in /nix/store/0ifrm3l8fci5rh6b4yd22ld77q9mza97-source/pkgs/by-name/ra/radicle-node/package.nix:165 because it is marked as insecure

       Known issues:
        - Private repositories are insecure: traffic between nodes is not encrypted and not authenticated.

       You can install it anyway by allowing this package, using the
       following methods:

       a) To temporarily allow all insecure packages, you can use an environment
          variable for a single invocation of the nix tools:

            $ export NIXPKGS_ALLOW_INSECURE=1

          Note: When using `nix shell`, `nix build`, `nix develop`, etc with a flake,
                then pass `--impure` in order to allow use of environment variables.

       b) for `nixos-rebuild` you can add ‘radicle-node-1.10.3’ to
          `nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
          like so:

            {
              nixpkgs.config.permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

       c) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
          ‘radicle-node-1.10.3’ to `permittedInsecurePackages` in
          ~/.config/nixpkgs/config.nix, like so:

            {
              permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

error:
       … while calling the 'derivationStrict' builtin
         at «nix-internal»/derivation-internal.nix:37:12:
           36|
           37|   strict = derivationStrict drvAttrs;
             |            ^
           38|

       … while evaluating derivation 'home-manager-generation'
         whose name attribute is located at «https://releases.nixos.org/nixos/unstable-small/nixos-26.11pre1079814.31b6ba6aadb1/nixexprs.tar.xz?narHash=sha256-BdR35dyXnujRlOuHEvPdtNV6JFEIOQkKyT93EjGFWU4%3D»/pkgs/stdenv/generic/make-derivation.nix:651:11

       … while evaluating attribute 'buildCommand' of derivation 'home-manager-generation'
         at «https://releases.nixos.org/nixos/unstable-small/nixos-26.11pre1079814.31b6ba6aadb1/nixexprs.tar.xz?narHash=sha256-BdR35dyXnujRlOuHEvPdtNV6JFEIOQkKyT93EjGFWU4%3D»/pkgs/build-support/trivial-builders/default.nix:88:9:
           87|         inherit name;
           88|         buildCommand = lib.toFunction buildCommand finalAttrs;
             |         ^
           89|         passAsFile = defaultPassAsFile ++ (userAttrs.passAsFile or [ ]);

       … while evaluating the option `home.activation.installPackages.data':

       … while evaluating definitions from `/nix/store/xnygwnm7n6j5rnnwb4dcp0i2hlwq5amj-source/modules/home-environment.nix':

       (stack trace truncated; use '--show-trace' to show the full, detailed trace)

       error: Refusing to evaluate package 'radicle-node-1.10.3' in /nix/store/0ifrm3l8fci5rh6b4yd22ld77q9mza97-source/pkgs/by-name/ra/radicle-node/package.nix:165 because it is marked as insecure

       Known issues:
        - Private repositories are insecure: traffic between nodes is not encrypted and not authenticated.

       You can install it anyway by allowing this package, using the
       following methods:

       a) To temporarily allow all insecure packages, you can use an environment
          variable for a single invocation of the nix tools:

            $ export NIXPKGS_ALLOW_INSECURE=1

          Note: When using `nix shell`, `nix build`, `nix develop`, etc with a flake,
                then pass `--impure` in order to allow use of environment variables.

       b) for `nixos-rebuild` you can add ‘radicle-node-1.10.3’ to
          `nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
          like so:

            {
              nixpkgs.config.permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

       c) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
          ‘radicle-node-1.10.3’ to `permittedInsecurePackages` in
          ~/.config/nixpkgs/config.nix, like so:

            {
              permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

error:
       … while evaluating a branch condition
         at «string»:25:5:
           24|     v:
           25|     if !builtins.isAttrs v || isDrv v then
             |     ^
           26|       v

       … in the left operand of the OR (||) operator
         at «string»:25:28:
           24|     v:
           25|     if !builtins.isAttrs v || isDrv v then
             |                            ^
           26|       v

       … while evaluating definitions from `/nix/store/9iv83r72z5xwgylkwms1qip1ijnr6jqs-source/modules/transposition.nix':

       … while evaluating definitions from `/nix/store/i3brns3mkkn52rdp80bjkjmff9v3fq78-source/modules/checks/machines.nix, via option perSystem':

       … while evaluating the option `system.build.toplevel':

       … while evaluating definitions from `/nix/store/0ifrm3l8fci5rh6b4yd22ld77q9mza97-source/nixos/modules/system/activation/top-level.nix':

       … while evaluating the option `systemd.services.radicle-node.serviceConfig':

       … while evaluating definitions from `/nix/store/0ifrm3l8fci5rh6b4yd22ld77q9mza97-source/nixos/modules/services/misc/radicle.nix':

       (stack trace truncated; use '--show-trace' to show the full, detailed trace)

       error: Refusing to evaluate package 'radicle-node-1.10.3' in /nix/store/0ifrm3l8fci5rh6b4yd22ld77q9mza97-source/pkgs/by-name/ra/radicle-node/package.nix:165 because it is marked as insecure

       Known issues:
        - Private repositories are insecure: traffic between nodes is not encrypted and not authenticated.

       You can install it anyway by allowing this package, using the
       following methods:

       a) To temporarily allow all insecure packages, you can use an environment
          variable for a single invocation of the nix tools:

            $ export NIXPKGS_ALLOW_INSECURE=1

          Note: When using `nix shell`, `nix build`, `nix develop`, etc with a flake,
                then pass `--impure` in order to allow use of environment variables.

       b) for `nixos-rebuild` you can add ‘radicle-node-1.10.3’ to
          `nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
          like so:

            {
              nixpkgs.config.permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

       c) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
          ‘radicle-node-1.10.3’ to `permittedInsecurePackages` in
          ~/.config/nixpkgs/config.nix, like so:

            {
              permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

error:
       … while evaluating a branch condition
         at «string»:25:5:
           24|     v:
           25|     if !builtins.isAttrs v || isDrv v then
             |     ^
           26|       v

       … in the left operand of the OR (||) operator
         at «string»:25:28:
           24|     v:
           25|     if !builtins.isAttrs v || isDrv v then
             |                            ^
           26|       v

       … while evaluating definitions from `/nix/store/9iv83r72z5xwgylkwms1qip1ijnr6jqs-source/modules/transposition.nix':

       … while evaluating definitions from `/nix/store/i3brns3mkkn52rdp80bjkjmff9v3fq78-source/modules/checks/machines.nix, via option perSystem':

       … while evaluating the option `system.build.toplevel':

       … while evaluating definitions from `/nix/store/0ifrm3l8fci5rh6b4yd22ld77q9mza97-source/nixos/modules/system/activation/top-level.nix':

       … while evaluating the option `warnings':

       … while evaluating definitions from `/nix/store/0ifrm3l8fci5rh6b4yd22ld77q9mza97-source/nixos/modules/system/boot/systemd.nix':

       … while evaluating the option `systemd.services.home-manager-cameron.serviceConfig':

       … while evaluating definitions from `/nix/store/xnygwnm7n6j5rnnwb4dcp0i2hlwq5amj-source/nixos':

       … while evaluating the option `home-manager.users.cameron.home.file."/home/cameron/.config/fontconfig/conf.d/10-hm-fonts.conf".source':

       … while evaluating definitions from `/nix/store/xnygwnm7n6j5rnnwb4dcp0i2hlwq5amj-source/modules/misc/xdg':

       … while evaluating the option `home-manager.users.cameron.xdg.configFile."fontconfig/conf.d/10-hm-fonts.conf".source':

       … while evaluating definitions from `/nix/store/xnygwnm7n6j5rnnwb4dcp0i2hlwq5amj-source/modules/misc/fontconfig.nix':

       … while evaluating the option `home-manager.users.cameron.fonts.fontconfig.configFile.fonts.source':

       … while evaluating definitions from `/nix/store/xnygwnm7n6j5rnnwb4dcp0i2hlwq5amj-source/modules/misc/fontconfig.nix':

       … while evaluating the option `home-manager.users.cameron.fonts.fontconfig.configFile.fonts.settings':

       … while evaluating definitions from `/nix/store/xnygwnm7n6j5rnnwb4dcp0i2hlwq5amj-source/modules/misc/fontconfig.nix':

       (stack trace truncated; use '--show-trace' to show the full, detailed trace)

       error: Refusing to evaluate package 'radicle-node-1.10.3' in /nix/store/0ifrm3l8fci5rh6b4yd22ld77q9mza97-source/pkgs/by-name/ra/radicle-node/package.nix:165 because it is marked as insecure

       Known issues:
        - Private repositories are insecure: traffic between nodes is not encrypted and not authenticated.

       You can install it anyway by allowing this package, using the
       following methods:

       a) To temporarily allow all insecure packages, you can use an environment
          variable for a single invocation of the nix tools:

            $ export NIXPKGS_ALLOW_INSECURE=1

          Note: When using `nix shell`, `nix build`, `nix develop`, etc with a flake,
                then pass `--impure` in order to allow use of environment variables.

       b) for `nixos-rebuild` you can add ‘radicle-node-1.10.3’ to
          `nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
          like so:

            {
              nixpkgs.config.permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

       c) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
          ‘radicle-node-1.10.3’ to `permittedInsecurePackages` in
          ~/.config/nixpkgs/config.nix, like so:

            {
              permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

error:
       … while evaluating a branch condition
         at «string»:25:5:
           24|     v:
           25|     if !builtins.isAttrs v || isDrv v then
             |     ^
           26|       v

       … in the left operand of the OR (||) operator
         at «string»:25:28:
           24|     v:
           25|     if !builtins.isAttrs v || isDrv v then
             |                            ^
           26|       v

       … while evaluating definitions from `/nix/store/9iv83r72z5xwgylkwms1qip1ijnr6jqs-source/modules/transposition.nix':

       … while evaluating definitions from `/nix/store/i3brns3mkkn52rdp80bjkjmff9v3fq78-source/modules/checks/machines.nix, via option perSystem':

       … while evaluating the option `system.build.toplevel':

       … while evaluating definitions from `/nix/store/0ifrm3l8fci5rh6b4yd22ld77q9mza97-source/nixos/modules/system/activation/top-level.nix':

       … while evaluating the option `warnings':

       … while evaluating definitions from `/nix/store/0ifrm3l8fci5rh6b4yd22ld77q9mza97-source/nixos/modules/system/boot/systemd.nix':

       … while evaluating the option `systemd.services.home-manager-cameron.serviceConfig':

       … while evaluating definitions from `/nix/store/xnygwnm7n6j5rnnwb4dcp0i2hlwq5amj-source/nixos':

       … while evaluating the option `home-manager.users.cameron.home.file."/home/cameron/.config/fontconfig/conf.d/10-hm-fonts.conf".source':

       … while evaluating definitions from `/nix/store/xnygwnm7n6j5rnnwb4dcp0i2hlwq5amj-source/modules/misc/xdg':

       … while evaluating the option `home-manager.users.cameron.xdg.configFile."fontconfig/conf.d/10-hm-fonts.conf".source':

       … while evaluating definitions from `/nix/store/xnygwnm7n6j5rnnwb4dcp0i2hlwq5amj-source/modules/misc/fontconfig.nix':

       … while evaluating the option `home-manager.users.cameron.fonts.fontconfig.configFile.fonts.source':

       … while evaluating definitions from `/nix/store/xnygwnm7n6j5rnnwb4dcp0i2hlwq5amj-source/modules/misc/fontconfig.nix':

       … while evaluating the option `home-manager.users.cameron.fonts.fontconfig.configFile.fonts.settings':

       … while evaluating definitions from `/nix/store/xnygwnm7n6j5rnnwb4dcp0i2hlwq5amj-source/modules/misc/fontconfig.nix':

       (stack trace truncated; use '--show-trace' to show the full, detailed trace)

       error: Refusing to evaluate package 'radicle-node-1.10.3' in /nix/store/0ifrm3l8fci5rh6b4yd22ld77q9mza97-source/pkgs/by-name/ra/radicle-node/package.nix:165 because it is marked as insecure

       Known issues:
        - Private repositories are insecure: traffic between nodes is not encrypted and not authenticated.

       You can install it anyway by allowing this package, using the
       following methods:

       a) To temporarily allow all insecure packages, you can use an environment
          variable for a single invocation of the nix tools:

            $ export NIXPKGS_ALLOW_INSECURE=1

          Note: When using `nix shell`, `nix build`, `nix develop`, etc with a flake,
                then pass `--impure` in order to allow use of environment variables.

       b) for `nixos-rebuild` you can add ‘radicle-node-1.10.3’ to
          `nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
          like so:

            {
              nixpkgs.config.permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

       c) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
          ‘radicle-node-1.10.3’ to `permittedInsecurePackages` in
          ~/.config/nixpkgs/config.nix, like so:

            {
              permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

error:
       … while evaluating a branch condition
         at «string»:25:5:
           24|     v:
           25|     if !builtins.isAttrs v || isDrv v then
             |     ^
           26|       v

       … in the left operand of the OR (||) operator
         at «string»:25:28:
           24|     v:
           25|     if !builtins.isAttrs v || isDrv v then
             |                            ^
           26|       v

       … while evaluating definitions from `/nix/store/9iv83r72z5xwgylkwms1qip1ijnr6jqs-source/modules/transposition.nix':

       … while evaluating definitions from `/nix/store/i3brns3mkkn52rdp80bjkjmff9v3fq78-source/modules/checks/machines.nix, via option perSystem':

       … while evaluating the option `system.build.toplevel':

       … while evaluating definitions from `/nix/store/0ifrm3l8fci5rh6b4yd22ld77q9mza97-source/nixos/modules/system/activation/top-level.nix':

       … while evaluating the option `warnings':

       … while evaluating definitions from `/nix/store/0ifrm3l8fci5rh6b4yd22ld77q9mza97-source/nixos/modules/system/boot/systemd.nix':

       … while evaluating the option `systemd.services.home-manager-cameron.serviceConfig':

       … while evaluating definitions from `/nix/store/xnygwnm7n6j5rnnwb4dcp0i2hlwq5amj-source/nixos':

       … while evaluating the option `home-manager.users.cameron.home.file."/home/cameron/.config/fontconfig/conf.d/10-hm-fonts.conf".source':

       … while evaluating definitions from `/nix/store/xnygwnm7n6j5rnnwb4dcp0i2hlwq5amj-source/modules/misc/xdg':

       … while evaluating the option `home-manager.users.cameron.xdg.configFile."fontconfig/conf.d/10-hm-fonts.conf".source':

       … while evaluating definitions from `/nix/store/xnygwnm7n6j5rnnwb4dcp0i2hlwq5amj-source/modules/misc/fontconfig.nix':

       … while evaluating the option `home-manager.users.cameron.fonts.fontconfig.configFile.fonts.source':

       … while evaluating definitions from `/nix/store/xnygwnm7n6j5rnnwb4dcp0i2hlwq5amj-source/modules/misc/fontconfig.nix':

       … while evaluating the option `home-manager.users.cameron.fonts.fontconfig.configFile.fonts.settings':

       … while evaluating definitions from `/nix/store/xnygwnm7n6j5rnnwb4dcp0i2hlwq5amj-source/modules/misc/fontconfig.nix':

       (stack trace truncated; use '--show-trace' to show the full, detailed trace)

       error: Refusing to evaluate package 'radicle-node-1.10.3' in /nix/store/0ifrm3l8fci5rh6b4yd22ld77q9mza97-source/pkgs/by-name/ra/radicle-node/package.nix:165 because it is marked as insecure

       Known issues:
        - Private repositories are insecure: traffic between nodes is not encrypted and not authenticated.

       You can install it anyway by allowing this package, using the
       following methods:

       a) To temporarily allow all insecure packages, you can use an environment
          variable for a single invocation of the nix tools:

            $ export NIXPKGS_ALLOW_INSECURE=1

          Note: When using `nix shell`, `nix build`, `nix develop`, etc with a flake,
                then pass `--impure` in order to allow use of environment variables.

       b) for `nixos-rebuild` you can add ‘radicle-node-1.10.3’ to
          `nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
          like so:

            {
              nixpkgs.config.permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

       c) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
          ‘radicle-node-1.10.3’ to `permittedInsecurePackages` in
          ~/.config/nixpkgs/config.nix, like so:

            {
              permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

error:
       … while evaluating a branch condition
         at «string»:25:5:
           24|     v:
           25|     if !builtins.isAttrs v || isDrv v then
             |     ^
           26|       v

       … in the left operand of the OR (||) operator
         at «string»:25:28:
           24|     v:
           25|     if !builtins.isAttrs v || isDrv v then
             |                            ^
           26|       v

       … while evaluating definitions from `/nix/store/9iv83r72z5xwgylkwms1qip1ijnr6jqs-source/modules/transposition.nix':

       … while evaluating definitions from `/nix/store/i3brns3mkkn52rdp80bjkjmff9v3fq78-source/modules/checks/machines.nix, via option perSystem':

       … while evaluating the option `system.build.toplevel':

       … while evaluating definitions from `/nix/store/0ifrm3l8fci5rh6b4yd22ld77q9mza97-source/nixos/modules/system/activation/top-level.nix':

       (stack trace truncated; use '--show-trace' to show the full, detailed trace)

       error: Refusing to evaluate package 'radicle-node-1.10.3' in /nix/store/0ifrm3l8fci5rh6b4yd22ld77q9mza97-source/pkgs/by-name/ra/radicle-node/package.nix:165 because it is marked as insecure

       Known issues:
        - Private repositories are insecure: traffic between nodes is not encrypted and not authenticated.

       You can install it anyway by allowing this package, using the
       following methods:

       a) To temporarily allow all insecure packages, you can use an environment
          variable for a single invocation of the nix tools:

            $ export NIXPKGS_ALLOW_INSECURE=1

          Note: When using `nix shell`, `nix build`, `nix develop`, etc with a flake,
                then pass `--impure` in order to allow use of environment variables.

       b) for `nixos-rebuild` you can add ‘radicle-node-1.10.3’ to
          `nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
          like so:

            {
              nixpkgs.config.permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

       c) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
          ‘radicle-node-1.10.3’ to `permittedInsecurePackages` in
          ~/.config/nixpkgs/config.nix, like so:

            {
              permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

error:
       … while calling the 'derivationStrict' builtin
         at «nix-internal»/derivation-internal.nix:37:12:
           36|
           37|   strict = derivationStrict drvAttrs;
             |            ^
           38|

       … while evaluating derivation 'structure-pi-agent-environment'
         whose name attribute is located at «https://releases.nixos.org/nixos/unstable-small/nixos-26.11pre1079814.31b6ba6aadb1/nixexprs.tar.xz?narHash=sha256-BdR35dyXnujRlOuHEvPdtNV6JFEIOQkKyT93EjGFWU4%3D»/pkgs/stdenv/generic/make-derivation.nix:651:11

       … while evaluating attribute 'actualJson' of derivation 'structure-pi-agent-environment'
         at «git+file:///var/lib/nixbot/worktrees/1-8f1b0160215b-165?ref=HEAD&rev=4c6b7d9582134a8b265b1eff7d9772e66b269b5c»/modules/lib/mk-structural-check.nix:25:9:
           24|       {
           25|         actualJson = builtins.toJSON actual;
             |         ^
           26|         expectedJson = builtins.toJSON expected;

       … while evaluating the option `home.activation.installPackages.data':

       … while evaluating definitions from `/nix/store/xnygwnm7n6j5rnnwb4dcp0i2hlwq5amj-source/modules/home-environment.nix':

       (stack trace truncated; use '--show-trace' to show the full, detailed trace)

       error: Refusing to evaluate package 'radicle-node-1.10.3' in /nix/store/0ifrm3l8fci5rh6b4yd22ld77q9mza97-source/pkgs/by-name/ra/radicle-node/package.nix:165 because it is marked as insecure

       Known issues:
        - Private repositories are insecure: traffic between nodes is not encrypted and not authenticated.

       You can install it anyway by allowing this package, using the
       following methods:

       a) To temporarily allow all insecure packages, you can use an environment
          variable for a single invocation of the nix tools:

            $ export NIXPKGS_ALLOW_INSECURE=1

          Note: When using `nix shell`, `nix build`, `nix develop`, etc with a flake,
                then pass `--impure` in order to allow use of environment variables.

       b) for `nixos-rebuild` you can add ‘radicle-node-1.10.3’ to
          `nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
          like so:

            {
              nixpkgs.config.permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

       c) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
          ‘radicle-node-1.10.3’ to `permittedInsecurePackages` in
          ~/.config/nixpkgs/config.nix, like so:

            {
              permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

error:
       … while evaluating a branch condition
         at «string»:25:5:
           24|     v:
           25|     if !builtins.isAttrs v || isDrv v then
             |     ^
           26|       v

       … in the left operand of the OR (||) operator
         at «string»:25:28:
           24|     v:
           25|     if !builtins.isAttrs v || isDrv v then
             |                            ^
           26|       v

       … while evaluating definitions from `/nix/store/9iv83r72z5xwgylkwms1qip1ijnr6jqs-source/modules/transposition.nix':

       … while evaluating definitions from `/nix/store/i3brns3mkkn52rdp80bjkjmff9v3fq78-source/modules/checks/pyrite-audio.nix, via option perSystem':

       … while evaluating the option `boot.extraModulePackages':

       … while evaluating definitions from `/nix/store/i3brns3mkkn52rdp80bjkjmff9v3fq78-source/modules/machines/nixos/pyrite/default.nix, via option flake.modules.nixos."machines/nixos/pyrite"':

       (stack trace truncated; use '--show-trace' to show the full, detailed trace)

       error: snd-hda-macbookpro: only Linux 6.18.52 has been checked; revalidate the source/header layout and module selection before changing this boundary

error:
       … while evaluating a branch condition
         at «string»:25:5:
           24|     v:
           25|     if !builtins.isAttrs v || isDrv v then
             |     ^
           26|       v

       … in the left operand of the OR (||) operator
         at «string»:25:28:
           24|     v:
           25|     if !builtins.isAttrs v || isDrv v then
             |                            ^
           26|       v

       … while evaluating definitions from `/nix/store/9iv83r72z5xwgylkwms1qip1ijnr6jqs-source/modules/transposition.nix':

       … while evaluating definitions from `/nix/store/i3brns3mkkn52rdp80bjkjmff9v3fq78-source/modules/checks/pyrite-bluetooth.nix, via option perSystem':

       … while evaluating definitions from `/nix/store/9iv83r72z5xwgylkwms1qip1ijnr6jqs-source/modules/transposition.nix':

       … while evaluating definitions from `/nix/store/i3brns3mkkn52rdp80bjkjmff9v3fq78-source/modules/checks/pyrite-audio.nix, via option perSystem':

       … while evaluating the option `boot.extraModulePackages':

       … while evaluating definitions from `/nix/store/i3brns3mkkn52rdp80bjkjmff9v3fq78-source/modules/machines/nixos/pyrite/default.nix, via option flake.modules.nixos."machines/nixos/pyrite"':

       (stack trace truncated; use '--show-trace' to show the full, detailed trace)

       error: snd-hda-macbookpro: only Linux 6.18.52 has been checked; revalidate the source/header layout and module selection before changing this boundary